2 Nozzle Flowmeter Filling Line – Usage Areas and Products That Can Be Filled

The flowmeter filling line with 2 nozzles is designed to produce low and medium viscosity liquid products. Designed for precise and repeatable volumetric filling , it is a compact and flexible It is an automatic filling solution. Thanks to the two-nozzle structure, especially in small and medium-sized production facilities, in lines with frequent product/volume changes It offers both a flexible and low-investment filling opportunity.

1. In Which Areas Is It Used? (Sectors)

The 2 nozzle flowmeter filling line is widely used in the following industries:

• Food and beverage industry:
  Drinking water, flavored water, vegetable oils (sunflower, corn, olive oil, etc.), vinegar, fluid sauces and syrups.
• Detergents and cleaning products:
  Liquid dishwashing detergent, liquid laundry detergent, surface cleaner, window wiper and general cleaning products; chlorinated products such as bleach when the materials in contact with the product are selected appropriately.
• Cosmetics and personal care:
  Tonic, micellar water, facial cleansing solutions, liquid soap and relatively fluid shampoos, cologne and alcohol-based products (with material and design in accordance with ATEX requirements).
• Oil and lubricants industry:
  Thin/medium viscosity engine oil, hydraulic oils, gear oils (not very dense types) and similar mineral oils.
• Industrial chemical products:
  Solvents, solvents (thinner, alcohol derivatives, etc. – with appropriate design and material), antifreeze and glycol-based mixtures, water-based chemical solutions.
• Agricultural and agrochemicals:
  Liquid fertilizers, fluid pesticides and agrochemicals in emulsion form.

2. What Types of Substances Are Filled? (In terms of Product Type)

Since it is a flowmeter system, it is ideal for well-flowing liquids, especially where volumetric precision is desired . 2-nozzle structure; pilot productions, lines with a large number of different products, and frequent format changes required It is extremely suitable for occasions.

Suitable Product Types

Low viscosity (flowing like water) products

• Water, drinking water, flavored water
• Light drink syrups
• Fine detergents, glass wipe, surface cleaners
• Vinegar and some fluid sauces

Medium viscosity products

• Liquid dishwashing detergent and liquid laundry detergent
• Light shampoos and liquid soaps
• Some mineral oils and chemical solutions

Conductive/non-conductive products

• Magnetic flowmeter: Suitable for water-based, conductive products (most food liquids, detergents, water-based chemicals).
• Oval gear / mass flowmeter: It is preferred for oils, solvents and non-conductive chemical products.

3. Items to Watch Out For / Not Suitable

A linear system with a flowmeter may not be ideal for all product types. Especially in the following products Different filling technologies should be considered:

• Very high viscosity products:
  Tomato paste, dense pastes, heavy cream structures and very viscous products Piston, cream filling lines or loadcell weighing systems are more suitable.
• Granular / particulate products:
  Sauces with fruit pieces, products containing granules/grains; It can cause blockages in flowmeters and pipelines.
• Products that foam excessively:
  Can be filled in flowmeter lines with 2 nozzles; However, it is not necessarily rising nozzle, smooth flow at the beginning and The process should be designed with appropriate filling speed settings .

Usage Areas and Fillable Products (Catalog Text)

Flowmeter filling line with 2 nozzles; in the food, beverage, detergent, cosmetics, chemical and oil sectors, It is designed for precise and repeatable volumetric filling of low and medium viscosity liquid products. Water, flavored beverages, oils, vinegar, liquid dishwashing and laundry detergents, surface cleaners, liquid soap and light consistency shampoos, mineral oils, antifreeze and similar fluid chemical products can be used in filling. If the materials in contact with the product are selected appropriately, they must have certain acid/base characteristics. or solvent-based chemicals. Very high viscosity, granular or pasty not recommended for products; Different filling technologies should be evaluated for such applications. Thanks to the compact structure with two nozzles, small and medium-sized productions, frequent product/volume changes It provides flexible, economical and precise filling in the lines.