PURMED Xiaomi 3H / 3C / 2H / 2C / 2S / 1 / PRO Compatible Replacement Filter (Hybrid Filter with RFID)
PURMED Xiaomi 3H, 3C, 2H, 2C, 2S, 1 and PRO compatible replacement filter,
Offering a single solution for Xiaomi's most used air purifier models
It is a high-performance hybrid filter.
With a single filter, you can use both new generation devices such as 3H and 3C .
1, 2H, 2C, 2S and PRO by feeding previous generation models
It allows you to manage the entire Xiaomi ecosystem from a single point.
Inside the replacement filter are three distinct layers:
pre-filter + activated carbon + True HEPA.
Thanks to this structure, both visible coarse dirt and invisible to the naked eye
fine particles, odors and chemical gases are targeted at the same time.
Thanks to the integrated RFID chip , the filter life can be tracked by the device,
The replacement time can be easily checked via the Xiaomi app.
Which Xiaomi Models Is It Compatible With?
This PURMED Xiaomi compatible filter is mechanically fully compatible with the following air purifiers:
- Mi Smart Air Purifier 3H (Xiaomi 3H filter)
- Mi Smart Air Purifier 3C (Xiaomi 3C filter)
- Mi Smart Air Purifier 2H (Xiaomi 2H filter)
- Mi Smart Air Purifier 2C (Xiaomi 2C filter)
- Mi Smart Air Purifier 2S (Xiaomi 2S filter)
- Mi Smart Air Purifier 1
- Mi Smart Air Purifier PRO (Xiaomi PRO filter)
If you have any of these models, instead of looking for individual filters,
You can manage them all with a single PURMED filter.
To reduce air leaks as it is produced in dimensions fully compatible with the devices,
With performance close to the original air flow rate of your Xiaomi air purifier
It helps him keep working.
3-Layer Filter Structure
1) Pre-filter – the first barrier for large particles
- It is the layer that surrounds the outer part of the filter; Air passes through this section first.
- It captures large particles such as hair, dust balls, pet hair, pollen.
- By allowing the True HEPA and carbon layers to fill later
Extends filter life.
- It contributes to less strain on the device motor and to its quieter and more balanced operation.
2) Activated carbon – odor and chemical gas control
- The dense activated carbon in the second layer targets pollutants in the form of gases .
- It helps to keep odors and gases from the following sources in its porous structure:
- Cigarette and hookah smoke
- Food odors and oil mist
- Stove / fireplace smell
- Pet odors
- VOC/TVOC type chemical vapours released from cleaning products, new furniture and paint
- It contributes to making the living space feel not only "clean" but also more odorless and fresh .
3) True HEPA – allergen and fine dust wall
- Inside, the True HEPA layer targets ultrafine particles at the 0.3 micron level.
- With a filtration efficiency of at least 99.97% , it helps to keep:
- House dust mites and their residues
- Pollen and mold spores
- Some bacteria and smoke particles
- PM2.5 class fine dusts
- It makes breathing significantly easier for users with allergies, asthma and sensitive respiratory tract complaints.
Purple, Gray, Green Color Options – Which One Should You Choose?
PURMED Xiaomi 3H/3C/2H/2C/2S/1/PRO filter,
It is available in three color options according to different usage scenarios:
Purple filter – allergy-oriented use
- It is suitable for users with allergic constitutions and families with children.
- It is produced with a focus on high particle retention against fine particles, pollen and mold spores.
- It helps alleviate complaints experienced in city centers, near busy traffic lines, and during allergy seasons.
Grey filter – balanced, general use
- It is a versatile solution for everyday home and office use.
- It provides a balance between both dust and allergen control and odor and chemical vapor reduction .
- Unless there is a special excessive odor/chemical or intense pet problem, a gray filter is recommended.
Green filter – odour and chemical/VOC oriented use
- It is designed for areas with high odor and chemical load.
- Smoking areas provide an extra advantage for appliances that operate near the kitchen.
- Ideal for newly decorated spaces with the smell of paint, varnish, new furniture.
- Thanks to its reinforced activated carbon density, it offers extra support against VOC/TVOC type gases.
Impact in Heavily Polluted Environments
This set of filters not only collects visible dust, but simultaneously:
-
Particles such as pollen, mold spores, house dust mites that trigger allergies and asthma
It helps reduce its density in the air.
-
By trapping cigarette, food and oil odors on the filter surface,
It contributes to reducing the bad odor load.
- It helps control dander, odor and micro-allergens in homes with pets.
- Interior in areas of the city exposed to exhaust and industrial pollution
It helps to make it much more breathable than outside.
Lifespan and Replacement Period
According to the PURMED technical team, this is for the Xiaomi compatible HEPA filter
The recommended lifespan is between 8-12 months on average.
However, this period may be shortened or extended according to the following conditions:
- Outdoor air pollution in the area where the house is located
- Whether smoking is allowed indoors
- Number of pets and molting intensity
- How many hours a day the device works
Symptoms that indicate that the time for the filter replacement is approaching:
- Weakening of the air outlet even though the device operates at high speed
- A persistent odor of unknown origin spreads to the environment
- More dust accumulation than usual on furniture and surfaces
- Visible accumulation of dirt and particles on the filter surface
- Your Xiaomi device gives filter usage time warning thanks to RFID chip
When changing, the device must be turned off and
unplugged.
Vacuuming HEPA paper with a broom or washing it with water can disrupt the delicate fiber structure.
severely reduces filtration reliability.
Force reusing a filter that has reached the end of its useful life; both
It impairs the air quality and tires the motor of the device unnecessarily,
increases energy consumption.
Compliance and Brand Information
This product is not the original (OEM) filter manufactured by Xiaomi.
To be compatible with Xiaomi 3H, 3C, 2H, 2C, 2S, 1 and PRO air purifier models
A high-quality
It is a backup filter.
Xiaomi brand and model names used in the product description are only
It is included in order to "demonstrate compliance" .
The product sold is a registered PURMED filter product.
If you want to use your Xiaomi air purifier efficiently and safely for many years,
Choosing the right filter at the right time is critical.
PURMED Xiaomi 3H, 3C, 2H, 2C, 2S, 1 and PRO compatible replacement filter;
Its 3-layer hybrid structure, True HEPA technology, intense activated carbon content and
Managing the entire Xiaomi series with a single filter with RFID chip support
It offers a powerful and economical solution .
Related Products and Category Links
